IACS CO., LIMITED (Yiwu Fuwei e-commerce firm)

News Center
Contact Us

Contact Person: Frivy Flex

E-mail: Frivy.Flex@iacslight.com

skype: fobfrivy@gmail.com

Add: Pengjiang Distribution, Jiangmen City, Guangdon Province, China

industry knowledge

the Using Method of Potting Glue of Led Driver Power


LED driver power potting adhesive is suitable for potting protection of general electronic components, power modules and circuit boards, as well as potting of various electronic appliances, such as switching power supply, driving power supply, automotive HID lamp module power supply, automotive ignition system module power supply. , home appliance controllers, network transformers, etc. Many customers do not understand the use of LED driver power potting glue. Now, Xinwei Xiaobian explains how to use LED driver power potting glue:

1. Before mixing: A and B components should be fully stirred manually or mechanically to avoid performance changes due to sedimentation of the filler.

2. Mixing: Weigh the two parts in a 1:1 ratio and put them into a clean container and mix well. The error should not exceed 3%, otherwise it will affect the performance after curing.

3. Defoaming: Natural defoaming: The uniformly mixed gel is allowed to stand for 20-30 minutes, vacuum defoaming: vacuum degree is 0.08-0.1 MPa, vacuum is taken for 5-10 minutes.

4, perfusion: the glue should be filled in the operation time, otherwise it will affect the leveling. The surface of the substrate is kept clean and dry before potting.

5, curing: room temperature or heat curing can be. The curing speed of the glue has a great relationship with the curing temperature. It takes a long time to cure in the winter. It is recommended to cure by heating. It is cured at 80 ° C for 15-30 minutes, and it usually takes about 6-8 hours to cure at room temperature.

Yiwu Fuwei e-commerce firm (IACS Co., Limited) is a very professional Led manufacturer who produces high quality outdoor led light. Our popular products are solar led lights, UFO lights, underwater lights and so on. If you have any question about the led product, please feel free to contact us.